I/O Device Error
A common error encountered by Microsoft Windows users when trying to read or write from a drive, disk, or portable media device is the I/O device error. When this error is generated, the transfer mode that the operating system is attempting to use for the operation may not be recognized. The I/O error may be experienced with various media storage devices such as: external hard drives, DVD or CDs, DVD or CD drives, SD cards, or USB sticks/drives. Common causes of the error include faulty hardware, a loose connection between the hardware and computer, outdated hardware drivers, or the IDE channel properties require modification.
What Are the Common I/O Device Error Messages?
Unfortunately, the I/O device error can generated more than one error message. Some of the most commonly encountered messages associated with the error include:
- The request could not be performed because of an I/O device error
- Only part of a readprocessmemory request was completed
- Only part of a writeprocessmemory request was completed
Windows may display a “Windows error code” along with the plain language error message. The I/O device error codes that are associated with the error include: error 6, error 21, error 103, error 105, and error 131.
Why Does the I/O Device Error Occur?
There are a number of potential causes for I/O device errors on computers that run the Windows Operating System (OS). These include:
- Outdated or corrupt driver installation for the affected hardware device.
- Windows using an incompatible transfer mode for the hardware.
- Faulty or loose connection with the hardware.
- The portable media (CD, DVD, or SD card) is damaged or excessively dirty.
Basic I/O Device Error Troubleshooting
Before throwing away a “faulty” CD/DVD, or delving into more complex troubleshooting, there are some basic steps computer users can attempt to clear the I/O device error. If the steps do not solve the issue, they may help pinpoint what is causing the error to be thrown and save time in fixing the issue.
Step 1 – Restart the computer that is throwing the I/O device error.
Step 2 – Attempt to access the disk, drive, or portable media again.
Step 3 – If the error is still being thrown, try to access the disk on another computer (if available). This will help identify if the error is with the drive, IDE channel, or media (disk) itself.
Step 4 – If the disk/media opens on the alternative computer, there is an issue with the primary PC (drive, IDE, or connection). If it does not, there could be a problem with the media itself or IDE channel. If you do not have another computer available and the error is being thrown when attempting to read a CD/DVD or SD card, insert a different disk or card into the respective computer’s drive to see if it can be read. If it works, then the issue is with the disk/drive/device you are trying to use. If not, then it is with the IDE, drive, or connection on your primary computer.
How to Check Hardware Connections
Loose drive or hardware connections are a common cause of the I/O device error.
Step 1 – If the device throwing the error is an external hard drive, reseat the USB or fire wire connection to your computer.
Step 2 – If the error persists, connect the drive to an alternative USB port on the computer. If you are using a USB hub, connect the drive directly to one of the computer’s USB ports.
Step 3 – Obtain a replacement cable for the drive and reconnect to the computer.
Step 4 – Attempt to read or write to the drive or disk again. If the error continues to be thrown, the connection is not the likely cause of the problem. If you suspect the problem is with the internal hard drive on your computer, attempting to reconnect the drive is not recommended for the casual user as significant damage can result to the computer if the task is conducted improperly.
Change the IDE Channel Transfer Properties
Another cause of the I/O device error is that Windows has the transfer mode for the drive or device set incorrectly. The transfer mode can be changed or corrected by the end-user if logged in to the computer in administrator mode.
Step 1 – Select the “Start” menu button and then right click the “My Computer” icon.
Step 2 – Choose the “Manage” menu option on the subsequently displayed menu. Then, click or choose the “Device Manager” menu option located beneath the “Computer Management” window.
Step 3 – Select the menu icon to expand the “IDE ATA/ATAPI” controller display. There will be one or many listings for IDE ATA/ATAPI channels available on the computer.
Step 4 – Right click the channel that corresponds to the drive that is throwing the I/O device error. If you can’t determine which IDE channel is the appropriate one for the error being thrown on your computer choose the one labeled “Secondary IDE Channel.”
Step 5 – Select the “Properties” menu option followed by opening the “Advanced Settings” menu tab.
Step 6 – Choose the “PIO Only” menu option located in the “Transfer Mode” box. This will be the device corresponding for the drive throwing the error. On most computers, the correct option will be “Device 0.” Ensure you do not change the Primary IDE Channel Device 0 when manipulating the IDE properties since this is normally the system disk. Modifying the transfer mode for this disk can result in the Windows OS failing to work properly. On computers running the Windows 7 OS, uncheck the “Enable DMA” menu option to disable DMA. This is equivalent to the “PIO Only” setting on older versions of the Windows OS.
Step 7 – Select or click the “Ok” menu button and exit the configuration applications. On the Advanced Settings tab, select PIO Only in the Transfer Mode box for the device that represents the appropriate drive. Typically, this is Device 0. Then, click OK and exit all windows.
Step 8 – Restart your computer and test the drive or device that is throwing the I/O device error.
Step 9 – If the device or drive does not work after restart, then it may not be located under the secondary IDE channel device 0. If this is the case, change device 0’s transfer mode back to DMA, and repeat the process for the Primary IDE channel device 1 and then the Secondary IDE channel device 1 if the primary does not work (remembering not to change the Primary IDE channel device 0). After each change, restart the computer.
Verify the Status of the Device in Windows Device Manager
If changing the IDE channel device settings does not work, the drive status can be verified and troubleshoot via Windows Device Manager.
Step 1 – Select the “Start” menu and then click the “Control Panel” menu option.
Step 2 – Choose the “Performance and Maintenance” menu choice and then click the “System” menu option.
Step 3 – Choose the “Hardware” menu tab and open the “Device Manager.”
Step 4 – Locate the device that is throwing the I/O device error by expanding the menu items under the applicable category in the device manager.
Step 5 – If you note a red “X” on the menu icon located next to the device description, the hardware periphery has been disabled by the OS.
Step 6 – Open the “General” menu tab and select the “Enable Device” menu option located beneath the “Device Status” menu section.
Step 7 – Click the “Ok” menu button and follow the default menu prompts that follow. After the enabling device wizard exits, test the disk or drive that is throwing the error.
Step 8 – If the disk or drive does not work or continues to throw the same I/O error, select the “General” menu tab and click the “Troubleshoot” menu option found under the “Device Status” section.
Step 9 – Press the “Ok” menu button and follow the menu prompts. If there is still an error displayed, then the device driver likely requires updating.
Step 10 – Select the “Driver” menu tab. Then, click the “Update Driver” menu option and follow the default OS prompts.
Step 11 – Restart the computer and test the hardware throwing the I/O error.
Seek Help from the Hardware Manufacturer
After troubleshooting the I/O device error some end-users may not be able to solve the problem. Seeking additional information, firmware, or driver updates from the hardware manufacturer that may not be available through the Windows Device Manager is the next step to take to fix the issue.
Step 1 – Visit the hardware manufacturer’s website.
Step 2 – Locate the specific webpage for the hardware device that is throwing the device error.
Step 3 – Download the latest firmware or device driver available for the device onto your computer.
Step 4 – Double click the firmware or device driver after downloading to install on the computer.
Step 5 – Restart the computer and open or load the device that has been throwing the I/O device error.
Troubleshooting SD Card I/O Device Errors
Over the past five years, the number of devices that contain SD cards for use around the home or car have significantly increased. These include GPS devices, modems, TV and radio tuners, bar-code readers, and IrDA adapters. Unfortunately, a common problem that arises for Windows Vista users is getting an I/O device error when attempting to read SDHC memory cards that are 8 GB or larger. The error can be triggered from either a normal state of operation of the computer or when it resumes from hibernation or sleep modes.
Step 1 – Eject the SD card that is throwing the I/O device error.
Step 2 – Visit the Microsoft Update Center.
Step 3 – Download and install all recommended operating system updates. If the website does not guide you to the appropriate download, visit the 32 Bit SD Update Package or 64 Bit SD Update Package sites directly and download the new OS update.
Step 4 – Install the new OS updates if the application did not start automatically by double clicking the program file saved on the computer’s desktop.
Step 5 – Select the default menu prompts and then restart your computer when the installation is completed.
Step 6 – After the computer has restarted, insert the SD card into the computer’s SD card reader and it will now function properly.
|
|
Comments (67)
Leave a Reply
- NMI Parity Check/Memory Parity Error
Windows Operating System (OS) users may encounter the NMI Parity Check/Memory Parity Error during the computer start-up process. The error is normally displayed when a computer hangs or stops responding during the Windows start-up process, and may be the result of a number of hardware or hardware configuration problems. What does the NMI Parity Check/Memory [...]...
- Error 1603
When installing software that is packaged with the Windows Installer, users may get an error 1603. The actual error message that displays is “error 1603: A fatal error occurred during installation.” There are a few things that cause this to occur. Windows Installer and Encrypted Folders Users cannot install software packaged in the Windows Installer [...]...
- VMWare Error 1335
Computer professionals have used the VMWare workstation for a number of years to test software on different types of operating systems on a single computer. Those who purchase and download the VMWare software from the online store often encounter VMWare error 1335. This error is typically as a result of downloading the incorrect software build, [...]...
- Error Loading Operating System
The Error Loading Operating System error appears when an operating system fails to load properly. This error is localized to the Microsoft Windows XP operating system, so users of other operating systems should not face this problem. Essentially, the Error Loading Operating System error occurs at a point between the computer’s BIOS running checks on [...]...
- Windows Protection Error
A Windows Protection Error such as "Initializing device <device name> Windows Protection Error" can be received when either first starting Microsoft Windows or when shutting down your computer. The computer might then ask you restart the system. Windows Protection Errors are usually received by users of Windows 95, 98, and ME and these errors can [...]...
I need help! I am getting the IO error trying to use a universal data cable to put music files on my Motorola Debut cell phone. I’ve followed the directions listed here to fix the IO error to no avail. Is there anything else I can do?
what do i do if the error is in the USB port? do i do the same thing or are there special instructions? i really need help this is important.
i have these problem when im going to send something like music to my mp4.
I have the I/O error message while trying to update the firmware in my camera. Can you give me further advice, i didn’t want to start messing around with drivers, as all i am doing is plugging my camera in via USB…Thanks
Hey i have the same problem but on my portable hard drive….anyone knows how you fix this issue?
im having problems with my hp micro sd card 4gb plz help
i have problem sending pitchers to laptop to memorey card
plaese help me
i have this problem with my dane elec 8gb micro sd card. can some one help me please
I just installed a new hard drive. The CD/DVD drive recognized the recovery disc and formatted the hard drive and installed Windows XP service pack 1. When it asks for an installation disc for hardware discovered, ie, printer, the CD/DVD drive does not recognize the disc and if I force it to open, it comes up with the I/O device error. Changing the transfer mode in the advanced settings did not help.
Have you rebooted and checked that the mode change settings took effect? If so, and it didn’t work, have you tried returning it back to “DMA if available” and changing the Primary IDE to “PIO only” as the article says?
Are other CDs working in that drive with Windows XP?
As a last resort, especially if the issue is the CD itself (corrupted or scratched media for example) you can try downloading hardware drivers from the internet. Just check manufacturer’s websites (usually in support or download sections).
Anybody can solve this problem?
hi im having a compaq presario laptop with the same error.
I got the error after i installed XP on my laptop, normally use vista.
The problem is that it shows in the device manager that alot of my drivers are missing.
Even my lan/wi-fi doesnt shows up becouse it cant find any of the important drivers.
i tried to download a network card to my wi-fi, it show my internet connection, but can’t load any of ip or dns et.c..
I thought that reformatting it back to vista could help, becouse the drivers are probably only only working in vista.
But now that i tried to format it back to vista with my usb flash driver, it told me that there is an I/O Error, also when i tried to install/boot with the cd, and im sure there is nothing wrong with the cd, its new. It keep telling me that there is the I/O error, also my pc starts to huge lag.
Sorry for my bad english, but if anyone understood my problem, please help me.
i almost tried everything, also after the article.
And also i gotta say if its to any help, that when im trying to install vista with cd, it says press any button to boot from cd. and when i do that, it start to lag, and after 4-5 minuts, its says that ”An unexpected I/O error bla bla bla.. Status: 0x00000e9”
hope anyone can tell me what to do.
Within Windows XP the USB I/O error could simply be because drivers aren’t installed.
I assume if you haven’t managed to format or install Vista yet you still have your Windows XP install. You could run chkdsk in it to check for any errors on your disk that might be what’s creating problems.. If it finds and fixes errors try Window Vista DVD again.
On Microsoft Answers it is also suggested to reset the bios to default values so you might want to try that too.
Once my hard disk broke down and I tried to boot my computer from my floppy drive. Then this error came up. What should I do?
Floppies are such an old tech (I don’t even have one since a long time ago). Have you tried booting from a rescue CD?
Sir,
All of a sudden while transferring MP3 songs from my pc to creativve zen stone plus mp3 player, the process stopped and I got an I/o device error. The player is no longer recognized by my pc (OS Windows XP).
Pl. guide me and oblige.
Thanks,
Arivnd
i have the same problem but with windows 7 starter, if i put in a 2 or 4gb card and it is not recognised, if it is i can do nothing with it or the win explorer freezes. Error given is 0x8007045D, since so many users seem to have the same problem microsoft should surely issue a patch or solution program not say it is either hardware trouble (their usual answer) or tell us to buy a registry cleaner that may or may not fix it – no guarantees there.
Can anyone help please?
My husband changed the password on the mail and none of the computers now receive mail. we cannot remember the old password and need to find that or get the new one working. what to do?
Thank you–susan
When I go to Properties and go to Advanced Settings the only thing that I can do is to uncheck “Enable DMA”…Look … http://prikachi.com/images/940/3158940o.jpg
Unchecking “Enable DMA” is equivalent to enabling PIO only. So all you would need to do to follow those instructions is just disable DMA.
thanks mate I have just one more question … How can I know which is my device …
PS Im not English,sorry 4 that
I just check all of the listed controllers till I find those that list my devices in the Advanced Settings tab. I’m not sure how else to do this. On my computer a DVD drive is represented as “ATAPI Cdrom”, and a hard drive is represented as “ATA Disk”. If there’s no drive on the controller, nothing is listed.
ooh so helpful i found it… atapicdrom…I unchecked the DMA enabled in ATA Disk and i had problems with the sound and the mouse…I understand now..Thank you for everything
Hi, I have a Motion computing M1400 and when I started Win this tell me a device error: An error occurred while trying to access the user’s storage device. Most likely the device in not present, no ready or is locked, please correct the problem and click retry to try the operation again” Please help me how I can fix that.?
Please!!!
i have a problem on my flash disk or USB device. when i moved some file, the program said that “can’t read because I/O error…can i use this to solve it??
Yes, you should try it, and if it doesn’t work check the other comments.
while in properties there is no advance settings button. Im runnin vista x64 thanks in advance. What do i do?
I am having a problem with my exterior hard drive. All was working well and then I could not access it. I first checked on My Computer and the drive had disappeared. It had also disappeared from Device Manager. I have reinstalled it about 5 times and when I try to access it I get the I/O device error. I have tried to install it on my laptop and the same error comes up. What could be causing this to happen???
Thank you in advance
I’m not sure, but try rebooting the computer with the hard drive connected and see if it loads. If not try doing a full scan with an anti-virus program while the drive is connected. According to what I’ve read around the web this can be caused by a virus infection.