• Main Menu
  • Windows Protection Error


    A Windows Protection Error such as "Initializing device <device name> Windows Protection Error" can be received when either first starting Microsoft Windows or when shutting down your computer. The computer might then ask you restart the system.

    Windows Protection Errors are usually received by users of Windows 95, 98, and ME and these errors can occur for a number of reasons:

    • An error resulting from damage to the system's registry
    • An incompatibility occurring between the BIOS and a device attached to the computer
    • A problem with the cache system
    • A problem with memory
    • A virus
    • An address conflict or virtual driver conflict

    These are just some of the main reasons why a Windows Protection Error might occur.Windows Protection Error

    Repairing a Windows Protection Error

    Repairing Windows Protection Errors caused by Installing Hardware or Software

    When a Windows Protection Error is received after changing the software or hardware on a computer, the first thing to do is reboot the computer, and enter Safe Mode. In Safe Mode, try to undo the last task completed. This can be accomplished by deleting recently installed software, or by removing a recently attached hardware device. While in Safe Mode it is also a good idea to run your anti-virus program to clean up any viruses, which may be present. Then, reboot the computer and see if the Windows Protection Error recurs.

    Repairing Windows Protection Errors caused by Drivers and Startup Software

    It is also possible to repair Windows Protection Errors using the "msconfig" command.

    • Click the <Start> button
    • Click the <Run> button
    • Type "msconfig" into the Run window that opens
    • Click <OK>
    • Select the General tab when the System Configuration Utility window opens
    • Go to Selective Startup at the bottom of the window
    • Select or deselect each option one by one and reboot the computer as each option is selected

    Of particular importance is the "Load Startup Group Items" selection. Deselecting this option, and having the computer boot properly can narrow the problem down to startup software causing the Windows Protection Error.

    Repairing Windows Protection Errors caused by problems with the Registry

    The System Registry Checker can repair Windows Protection Errors caused by corruption in the registry. The System Registry Checker will scan the registry and alert you to any damage or problems within the registry.

    If the System Registry Checked fails, you can also restore a previous version of your registry. This can be accomplished by booting the computer using a startup disk. At the A:> prompt use the command "scanreg /restore" to choose a date before the computer started showing the Windows Protection Error.

    Got Something To Say:

    Your email address will not be published. Required fields are marked *

    2 comments
    1. Mohannad

      13 May, 2012 at 9:31 am

      Hi
      good day
      When I run the computer I get Error message
      (Dialer protection coud not be enabbled)

      Reply
    2. selva soledad

      9 April, 2011 at 8:23 pm

      no puedo abrir word ni exel dice error 2178 adems el msn me anda malisimamente mal… tambien dice el mismo error, gracias por su ayuda…
      Selva

      Reply
    Windows Errors
    174 queries in 0.638 seconds.