• Main Menu
  • Network Layer

    • Collision Domain

      Collision Domain

      A computer network can be segmented physically and logically. A collision domain is one of the logical network segments in which the data packets can collide with each other. One of the most common protocols used when referring to a collision domain is the Ethernet protocol. Collision domains are often referred to as ‘Ethernet segments.’

    • BOOTP

      BOOTP

      BOOTP is the Bootstrap Protocol. The BOOTP protocol is utilized by diskless workstations to gather configuration information from a network server. The information provided by the BOOTP protocol is: The IP address which should be utilized by the diskless workstation The IP address of a server which will provide an Operating System image for the

    • 802.1Q

      802.1Q

      802.1Q is also known as IEEE 802.1Q or VLAN tagging. It defines a virtual local area network. It is a protocol that allows virtual LANs to communicate with one another using a 3-layered router. It was developed as a part of IEEE 802. Why Was The 802.1Q Standard Developed? Large networks use up a lot

    86 queries in 0.139 seconds.